Keys	Fuel gauge sender
Engine	Fuel filler neck and breather pipe
Flywheel	Solid fuel lines on top of tank
Clutch cover and plate	Steering rack and knuckle
Exhaust manifolds	Power steering pump and pipe work
Exhaust up-pipe	Power steering reservoir
Exhaust down-pipe (including CAT)	Steering column and wheel
Exhaust system	Front cross member
Turbo	Front uprights
Intercooler and pipe work	Front lower wishbones
Radiator	Front struts
Radiator expansion tank	Front discs
Radiator header tank	Front calipers
Alternator	Front anti-roll bar
Fuel breather expansion tank	Pedal box complete (including throttle cable guide)
Fuel filter and bracket	Brake master cylinder and servo and solid pipe work
Boost control packs and bracket	Clutch master cylinder and pipe work
Gearbox and sender units	Brake proportioning valve and bracket
Gear selector rods	Front window mechanism
Gear stick and knob	Front window motors
Driveshafts (4)	Boot and fuel filler release handles and brackets
Propshaft	and cable from drivers foot well
Pitch stop bar	Boot latch and striker
Gearbox cross member (3 piece H-frame)	Boot lock and connecting bar
Rear differential	Door hinges (4)
Rear differential 'nose' cross member	Column stalks and shroud
Rear cross member	Switchgear
Rear lateral locating arms	Instrument binnacle
Rear longitudinal locating arms	Seat belts
Rear uprights	Seats
Rear struts	Battery
Rear brake discs	Wiring loom complete with ECU
Rear brake calipers	Fuse box bracket from front inner wing
Handbrake cables (including plate from handbrake end)	Wheels and tyres
Fuel tank	Wheel nuts
Fuel pump	Stereo and speakers if required
NOTE
An aftermarket induction kit will be required, as the original unit fitted to the Impreza will not fit the Murtaya.
In addition you will need a handbrake lever from a 400 series Rover which we can supply brand new if required.
Bitz, Unit 10D Balmakeith Industrial Estate, Nairn. IV12 5QW
Tel: 01667 456700  Email: bitzgarage@btconnect.com  Web site: www.bitzmotorsport.com